MIL-DTL-29469A(MC)
3.4.2 Fusing of ends of nylon material, taping and webbing. All
raw ends of nylon material, tape, and webbing shall be fused.
The apparatus used to fuse the tape ends shall be capable of
providing sufficient heat to provide a smooth edge and with the
cut ends of the tape yarns all fused together.
3.4.3 Parts list. A parts list shall be included in the
carrying case containing the component parts of the kit in
accordance with 3.3.2.17.
3.4.4 Etching. The etching shall be by means of a chemical,
electrical or mechanical etching process. The cross corpus
dimension shall be 2-3/8 inches (+ 1/16 inch) the length of the
body (head to foot), and 2-1/4 inches (+ 1/16 inch) the width
(outstretched hands and arms). The scroll with "INRI" above the
corpus shall be 3/8 inch in height and 5/8 inch in width.
Etching of the corpus and scroll as noted in Drawing 14-1-170.
Etching on the opposite (Protestant) side of the cross shall have
"IHS", with outlining, etched as noted in Drawing 14-1-170.
3.4.5 Repairs. Repairs such as mends, darns, patches or splices
are not permitted on the case.
3.5. Replacement of defective components. During the spreading,
cutting and manufacturing process, components having material
defects or damages that are classified as defective in 4.4.2
shall be removed from production and replaced with nondefective
and properly matched components.
3.6. Workmanship. Cloth components shall be clean and free of
holes, cuts, tears or other defects. Webbing and tapes shall
have no frayed or scalloped edges. Thread tension shall be
maintained so that there shall be no loose stitching and seam
allowances shall be maintained so that no runoffs, twists, pleats
or open seams shall result. All thread ends shall be trimmed to
1/2 inch or less. Care shall be taken in sewing to see that no
needle chews occur. Metal components shall be free of burrs,
sharp edges, or corroded areas and shall not be broken or
malformed.
3.7. Recycled, recovered, or environmentally preferable
materials. Recycled, recovered, or environmentally preferable
materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and
14
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business