MIL-DTL-29469A(MC)
inclusive. The stiffener shall be fabricated from sheet stock or
molded to size and all its edges finished smooth. The stiffeners
fabricated from sheet stock shall be produced in such a manner
that the long edges of the pieces shall be parallel with the
direction of extrusion (the long edges) of the roll of material
from which they are fabricated. All edges shall be smooth and
free from cracks. All stiffeners shall be stitched on the inside
of the carrying case. The dimensions of the stiffeners shall be
as follows:
Numbers
Inches
Front
5 x 6 x 1/8
1
Side
5-3/4 x 2-1/2
2
Back
5 x 6 x 1/8
1
Bottom
6 x 2-1/2
1
Top
6 x 3-1/4
1
Front lid
6 x 1-1/2
1
3.3.2.14.Accessory case. The Ecclesiastical accessory case shall
be made of material in accordance with 3.2.1. Nylon tape
conforming to type III, OD-7 color of MIL-T-5038 shall be used to
reinforce the edges of the case and cover flap, and thread
conforming to type I, class 1, subclass B of V-T-285 shall be
used with size E for binding stitching and size F for other
stitching. The accessory case shall have a standard webbing
strip of 2-1/4 inches nylon webbing, conforming to type VIIIc,
class 2, OD-7 color of MIL-W-4088 for attachment to the webbing
on the side of the carrier, or the cartridge belt with an
included standard keeper conforming to type X, black color of
MIL-H-9890. The cover flap of the accessory case shall be held
closed by fastener tape (hook and pile) conforming to type II,
class 1, OG-106 color of MIL-F-21840. The accessory case shall
be constructed in accordance with Drawing 14-1-166 and Parts List
14-1-166.
3.3.2.15.Container, priest bread. The priest bread container
shall be a small metal (with mil finished exterior and interior)
container that shall hold between 15 to 25 pieces of 2-3/4 inches
priest size breads. Size shall be 3 inches in diameter + 1/8,
7/8 inch in height + 1/16.
3.3.2.16.Protective insert. The protective insert shall be
sturdy, yet pliable foam conforming to type II, class 5, medium
firm of MIL-R-20092 or ASTM D-1056-91, type II, class A, grade
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business