MIL-DTL-29469A(MC)
2.4. Order of precedence. In the event of a conflict between the
text of this document and the references cited herein, the text
of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3.
REQUIREMENTS
3.1. First article. When specified (see 6.2), a sample shall be
subjected to first article inspection in accordance with 4.3.
3.2. Materials and components. The materials and components used
in the construction shall be in accordance with the drawings and
parts lists indexed in Section 2.2.2 and this specification.
3.2.1 Material and material colors for carrier and accessory
case. Material for construction of the carrier and accessory
case shall conform to class 3 of MIL-C-43734, which is 1000 -
denier type 440 cordura nylon material coated with water proofing
substance to create finished weight of 12 oz., but not less than
11 oz. All material colors for the carrier and accessory case
shall be in accordance with FED-STD-595. Acceptable colors chips
are: 34082; 34083; 34084; 34086; 34088 or 34089.
3.2.2 Metal material. All metal material shall be type 304
corrosion resistant steel. When construction is complete, the
chalice cup, intinction cup, paten, cup base, cross base, pyx
base and pyx lid shall measure .040 +0 -.010. The cross material
shall be stainless plate, type 304, .125 thick per ASTM A 240.
3.3. Design and construction. The design and construction shall
be in accordance with the drawings listed in Section 2.2.2 and
this specification. Tolerances for overall dimensions on
components shall be in accordance with the manufacturer's
commercial practice unless otherwise specified herein.
3.3.1 Major components list. The components of the chaplain's
kit are designed to fit snugly in the carrying case in the
quantities indicated:
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business