MIL-DTL-29469A(MC)
TBD, suffix SCE-F2-TBD. The measurements for the indented bottom
protective insert shall be in accordance with Drawing 14-1-189.
The indented is to fit the bottom of the two and four ounce
bottles, the base of chalice, and the base of the cross and
crucifix. The insert shall protect and stabilize contents, and
also allow cushioning for individuals having suddenly fallen on
the case in combat and field conditions. Insert shall be as thin
as possible to save space and shall be made of a durable
material.
3.3.2.17.Parts list. The laminated parts list shall measure 4 by
4-1/2 (+ 1/8 inch tolerance) with a 1/8 inch minimum border.
Corners are to be rounded and shall be made from 50 to 60 pound
gray or off white color stock using 12 pitch bold print,
laminated on both sides, with 5-mil (minimum) plastic. Laminated
edges shall be at least 1/8 inch. The Major Components List in
3.3.1 reflects items and quantities required for this parts list.
3.3.3 Metal working and welding. Passivating of metal is not
required as long as 304 stainless steel is used. Metal parts
shall be cleaned of all residue before welding and all residue
and discoloration shall be cleaned after welding. All welding
shall be silver braising or fusion welding in accordance with
class C of MIL-STD-2219.
3.4. Construction, carrier and accessory case. The construction
of the carrier and accessory case shall conform in all respects
to the drawings listed in 2.2.2 and as specified herein. All raw
edges shall be overedged.
3.4.1 Stitches, seams, and stitching. Stitches, seams, and
stitching types listed below shall be in accordance with
FED-STD-751.
For all stitching except
Stitch type 301, 8 to 10
overedge stitching
stitches per inch with 3/16
minimum gage.
3.4.1.1. Automatic stitching. Automatic stitching machines may
be used to perform any of the stitch patterns, provided the
requirements for the stitch pattern, stitches per inch, and size
and type of thread are met; and at least three tying,
overlapping, or backstitches are used to secure the ends of
stitching.
12
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business