MIL-DTL-29469A(MC)
4.4.2.2. Dimensional examination. Examination shall be made for
compliance with all dimensions shown on the drawings which can be
examined on the end item, including stitch margins and gauge,
excluding reference dimensions. Any dimension exceeding the
applicable tolerance shall constitute a defect. The lot size
shall be expressed in units of kits. The sample unit shall be
one kit.
5.
PACKAGING
5.1. Packaging. For acquisition purposes, the packaging
requirements shall be as specified in the contract or order (see
6.2). When actual packaging of material is to be performed by
Department of Defense (DoD) personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by
the Inventory Control Point's packaging activity within the
Military Department of Defense Agency, or within the Military
Department's Systems Command. Packaging data retrieval is
available from the managing Military Department's or Defense
Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or
explanatory nature that may be helpful, but is not mandatory.)
6.1. Intended use. The chaplain's kit is intended to meet
requirements for religious services under combat conditions. The
kit is provided with a support strap to be worn over the shoulder
or attached to the wearer's belt by the two standard clip
fasteners on the back of the kit.
6.2. Acquisition requirements.
Acquisition documents must
specify the following:
a.
Title, number, and date of the specification.
b.
Issue of DoDISS to be cited in the solicitation, and if
required, the specific issue of individual documents referenced
(see 2.2).
c.
Packaging requirements (see 5.1).
d.
When a first article is required (see 3.1).
e.
Number of kits in first article (see 3.1).
f.
Any Government furnished material to be provided.
19
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business